logo
WhatsAPP
8618221411092

Tool Manufacturer Cuts Packing Time 38% with Pre-Cut Kraft Pads

Customer: a European manufacturer of metal cutting tools, shipping via distributor network.

latest company case about Tool Manufacturer Cuts Packing Time 38% with Pre-Cut Kraft Pads

Product used: Kraft Paper Pad, 70 gsm virgin kraft, single layer, in four lengths.

Result: average packing time per order down 38% over three months on two benches.

The baseline

The customer's standard method was crumpled kraft pulled from a roll at the bench. Operators tore a length, compressed it by hand, and packed it around the product. The method works, and for decades it was the industry default — but it produces inconsistent protection, depends entirely on operator technique, and consumes the one thing a packing bench cannot buy back: seconds.

The measured baseline, over one week across two benches: 74 seconds of packing time per order, of which roughly 40 was tearing, crumpling and tucking paper. The remainder was boxing, taping and labelling.

The change

We proposed a stocked range of pre-cut kraft pads: single and double layer, natural unbleached virgin kraft at 70 gsm, supplied in the customer's four most common carton footprints. The compressed pad is 13–16 cm wide from a 75 cm width before compression, and the stock lengths were 30, 40, 50 and 100 cm.

The design logic: the pad is dense compression-formed kraft, so a single pad laid in the carton bottom replaces a double handful of crumpled paper. A second pad on top, and a half-pad at each end for fragile SKUs.

ParameterSpecification
MaterialVirgin kraft paper, 70 gsm
ConstructionSingle or double layer
Stock sizes14x30, 14x40, 14x50, 14x60, 14x100 cm
ColourNatural unbleached
MOQ1,000 pieces

Measured result

Packing time fell from 74 to 46 seconds per order — a 38% reduction — and held there over the three-month measurement window. The improvement came almost entirely from eliminating the crumpling step: an operator drops a pad, places the product, drops a second pad, closes.

Two second-order effects appeared:

  • Protection consistency rose. A formed pad has a defined density; a hand-crumpled ball does not. The customer's damage rate did not fall measurably (it was already low at this weight class), but the variance did — no more shipments packed by a new operator on a Friday afternoon.
  • Paper consumption fell 22%. Crumpling over-provisions material because operators cannot judge compressed volume. Pads are bought at a fixed weight per order.

What we would change next time

The customer started with three pad lengths and added the fourth after six weeks. Starting with a full size audit at the outset would have avoided one changeover. The lesson for any industrial buyer: map carton footprints before specifying, not after.

Data note: figures in this article are representative values from this application type, shown for specification guidance. Project-specific data is available under NDA on request.

Request kraft pad samples in your carton sizes →