Furniture Exporter Replaces Foam Wrap on 3 Container Loads a Month
Customer: a flat-pack oak furniture exporter shipping to European retail chains.

Product used: Honeycomb Paper Roll, 38 cm x 100 m, 80 gsm brown kraft.
Result: foam sheet eliminated across three containers per month; damage rate unchanged; container cube freed for product.
The baseline
Every component — table tops, panels, shelf boards — was wrapped in 2 mm foam sheet before cartoning. The foam worked. It also consumed the most warehouse volume of any packaging input, arrived as bulky rolled stock, and made the export programme's sustainability paperwork awkward: European retail buyers were beginning to ask for the plastic content of transit packaging, and "polyethylene foam, not recyclable with the carton" was an answer losing accounts.
Why honeycomb roll, and why 38 cm
A flat panel is the friendliest shape paper cushioning can take: flat, rigid, with two faces to protect. The failure modes are edge crush and face scuffing — exactly what an expanded honeycomb cell structure distributes well, because the cells conform and the wrap builds thickness with every turn.
The 38 cm width covers the panel depth range with a single wrap plus a turn at the edges. The 100 m roll length at 80 gsm gives roughly 90–110 panels per roll depending on panel size and wrap count.
The wrap pattern
Wrap count was the variable that mattered. One full wrap passed the internal 0.8 m corner-drop but scuffed on the face where the panel rocked in the carton. Two wraps — one continuous pass building two layers on every face — passed, with the second wrap run in the opposite direction so the edges get doubled coverage where the first wrap's seam falls.
| Parameter | Before (foam) | After (honeycomb) |
|---|---|---|
| Wrap material | 2 mm PE foam sheet | 38 cm honeycomb roll, 80 gsm |
| Wraps per panel | 1 | 2 (opposite directions) |
| Packaging storage volume | 4 pallet positions | 1.5 pallet positions |
| Packing time per panel | 41 s | 38 s |
| Damage rate (6 months) | 0.6% | 0.6% |
| Plastic in transit pack | Yes | None |
The result that closed the decision
Damage did not improve — it did not need to; 0.6% was acceptable. The decision was made on three other lines: warehouse volume freed (4 pallet positions down to 1.5), the plastic question answered for retail buyers ("paper, monomaterial, goes in the paper stream with the carton"), and EPR declared tonnage falling with the foam gone.
What we would change next time
The first month's roll stock was 50 m rolls to ease handling trials. At trial volumes the changeover every 50 panels added more bench time than the wrap pattern saved. Move to 100 m rolls as soon as the pattern is signed off.
Data note: figures in this article are representative values from this application type, shown for specification guidance. Project-specific data is available under NDA on request.